Adsense

Raji Chem World Search Engine

Custom Search

Find the Properties of Chemicals

Nature Chemistry

Nature Chemistry

Adsense

Nature Chemistry

Friday, December 3, 2010

Organic Chemistry: Structure and Reactivity - Video Class By Peter Vollhardt

Directing Group Effects in Aromatic Electrophilic Substitution Reactions
Its a very nice video Class by prof. Peter Vollhard  from Berkeley University. Its a good resource for student as well lecturers.






Thursday, December 2, 2010

Organic Chemistry: Structure and Reactivity - Video Class By Peter Vollhardt

Electrophilic Aromatic Substitutions
Its a very nice video Class by prof. Peter Vollhard  from Berkeley University. Its a good resource for student as well lecturers.


Organic Chemistry: Structure and Reactivity - Video Class By Peter Vollhardt

Benzene and Aromaticity
Its Very Nice Video Class By prof. Peter Vollhard  from Berkeley University. Its a good resource for student as well lecturers.




Organic Chemistry: Structure and Reactivity - Video Class By Peter Vollhardt

Diels-Alder and Electrocyclic Reactions
Its Very Nice Video Class By prof. Peter Vollhard  from Berkeley University. Its a good resource for student as well lecturers.


Organic Chemistry: Structure and Reactivity - Video Class By Peter Vollhardt

Delocalized Pi system : Proppenyl and Extended Conjucation
Its Very Nice Video Class By prof. Peter Vollhard  from Berkeley University. Its a good resource for student as well lecturers.




Organic Chemistry: Structure and Reactivity - Video Class By Peter Vollhardt

Delocalized Pi Systems - Propenyl and Butadiene

Its Very Nice Video Class By prof. Peter Vollhard  from Berkeley University. Its a good resource for student as well lecturers.



Tuesday, November 30, 2010

Femtosecond laser

Femtosecond laser system 
  A detailed schematic of the femtosecond laser facility is shown in Figure 1. A femtosecond mode-locked seed beam of 14.5 nm bandwidth, pulse energies in the nanojoule range and repetition rate of 80 MHz is emitted from a Ti:sapphire oscillator pumped by a diode laser. A pulsed Nd:YLF operating at repetition rate of 1 kHz pumps the seed beam through a regenerative amplifier. Using the chirped pulse amplification technique, ultra-short pulses are generated with a FWHM pulse width of about 83 fs, 800 nm wavelength and 1 mJ maximum pulse energy.
To more information, read this PPT .


CSIR - Chemistry Study Materials - IV

CSIR and GATE exams are considered as gate way to do Phd in India in various field ranging from biology to engineering ,even foreign university expecting students applying from India to be csir cleared. Candidates are advised to go through the syllabus, Exam Pattern, Sample Papers for better preparation. Here you may get study materials for CSIR Exam paper-II. It is also good for all competitive exams.

CSIR - Chemistry Study Materials - III

CSIR and GATE exams are considered as gate way to do Phd in India in various field ranging from biology to engineering ,even foreign university expecting students applying from India to be csir cleared. Candidates are advised to go through the syllabus, Exam Pattern, Sample Papers for better preparation. Here you may get study materials for CSIR Exam paper-II. It is also good for all competitive exams.

CSIR - Chemistry Study Materials - II

CSIR and GATE exams are considered as gate way to do Phd in India in various field ranging from biology to engineering ,even foreign university expecting students applying from India to be csir cleared. Candidates are advised to go through the syllabus, Exam Pattern, Sample Papers for better preparation. Here you may get study materials for CSIR Exam paper-II. Its also good for all chemistry compettive Exams.

CSIR - Chemistry Study Materials - I

CSIR - Chemistry Study Materials for Paper-II

CSIR and GATE exams are considered as gate way to do Phd in India in various field ranging from biology to engineering ,even foreign university expecting students applying from India to be csir cleared. Candidates are advised to go through the syllabus, Exam Pattern, Sample Papers for better preparation. Here you may get study materials for CSIR Exam paper-II.


Synthesis of (Diacetoxyiodo)benzene

(Diacetoxyiodo)benzene; Large-Scale Synthesis:


K2S2O8 (100 mmol) was slowly added portion-wise over 20 min to a stirred solution of an iodobenzene (5.10 g, 25 mmol) in AcOH (125 mL) with concd H2SO4 (100 mmol) at r.t. (25 °C), and the mixture was stirred at r.t. for 4 h. The solution was then concentrated to half its volume by evaporation of AcOH under reduced pressure, and H2O (100 mL) was added. The precipitate formed was collected by filtration, washed with H2O (200 mL), and dried in air. A second crop of product was obtained by extraction of the filtrate with CH2Cl2 (3 × 25 mL); the combined extracts were dried over anhyd Na2SO4, filtered, and concentrated under reduced pressure. The combined crude products were purified by recrystallization from AcOH–hexane; yield: 7.15 g (88.7%).

Reference:

Synthesis 2005, No. 12, 1932–1934

Synthesis of Palladium tetrakis(triphenylphosphine)


Chemicals Used

Palladium dichloride (1g, 1 equiv.) Triphenylphosphine (7.4g, 5 equiv.) Dimethylsulphoxide (distilled, 12mL/mmol, 68mL) Hydrazine hydrate (1.1mL, 4 equiv.)

Procedure

Palladium chloride is placed in a 3 necked round bottomed flask which is fitted with a thermometer and a filter stick attached to a second inverted 3 necked round bottomed flask. DMSO is added, followed by triphenylphosphine. The mixture is heated to 140C using an oil bath with stirring in order to dissolve all the solid (a small amount of solid does not seem to dissolve). The oil bath is then removed and the mixture stirred for a further 15 minutes. Hydrazine hydrate is rapidly added causing evolution of nitrogen. The resulting dark solution is immediately cooled with a water bath until crystallisation begins to occur (~125C) at which point it is allowed to cool without external cooling. Once the mixture has reached room temperature, the apparatus is inverted in order to filter and the solid is washed succesively with absolute ethanol (2 x 10 mL) and dry ether (2 x 10 mL) (this is achieved by adding the solvent from a syringe through a side arm). The resulting yellow solid is then dried under vacuum for 3-4 hours.

Note:

All glassware should be oven or flame dried prior to use, and the entire procedure should be carried out under nitrogen. If care is taken in the preparation, the material should have a bench life of many months (>8), and should be stored under nitrogen in a freezer. 5-6g of catalyst is atttainable starting from 1g palladium dichloride. Analysis of the compound is not really required; if it's a yellow solid, it should work (although melting point determination should give a decomposition point of 115C, but this has not been checked)! On exposure to air, the material will slowly turn orange, this seems to be a result of reaction with water.

Reference:

D.R Coulson, Inorganic Syntheses XIII, p.121

Thursday, November 25, 2010

Iron-catalyzed oxidative homo-coupling of indoles via C–H cleavage

Iron-catalyzed oxidative homo-coupling of indoles via C–H cleavage

The authors, Tianmin Niu and Yuhong Zhang from Zhejiang University, peoples republic of China reported a cheap Fe catalysed Oxidativecoupling of N-H indoles. Its a new method for the homo-coupling of indoles has been developed by the use of FeCl3 as catalyst and molecular oxygen as the only oxidant. The protocol provides a practical and straightforward approach toward 3,3′-biindolyls.

For original Article:
doi:10.1016/j.tetlet.2010.10.088

Friday, November 12, 2010

Transition Metal Free C-H Activation and C-C Bond Formation – Is that Really Metal Free?


Transition metal catalysed direct arylation of aromatic C-H bonds is emerging as a valuable and efficient alternative to traditional cross-coupling in the construction of biaryl compounds. Selective functionalization of aromatic C–H bonds is now an important aspect of this rather general field due to the universal existence of aromatic functionalities in nature and the synthetic world. ‘Fenton’ chemistry and Friedel–Crafts reactions are early examples of transformations of aryl C–H bonds to different functionalities.

Many reports have demonstrated that direct arylation of heterocycles, arenes with directing groups, and electron-deficient arenes(1-7). As well a completely unactivated arene, benzene has been directly arylated by a few efficient transition-metal-catalyzed methods (8-12).

In 2003, Leadbeater et.al,. reported a transition metal free Suzuki coupling reaction in water using sodium carbonate as a base(13-14)(Scheme-1). Later, the same group reported the transition metal free sonogashira type reaction (15)(Scheme-2). After that they discovered that the reaction was in fact metal-mediated — by palladium contaminants of as little as 50 ppb that were present in the sodium carbonate base used. In 2009, Buchwald reported that iron catalysed cross coupling reaction has been done by copper catalyst which is an impurity in Iron source(16).

Scheme-1
Scheme-2

In 2008, Daugulis, reported transition-metal-free, base-mediated intramolecular arylation of phenols with aryl halides. The sp2 C-H bond functionalization occurs via a benzyne intermediate. At this point, a phenolate activating group is essential for the arylation(17)(Scheme-3). In the same time, Itami et al. reported a transition metal free direct C-H arylation electron deficient nitrogen heterocycles using haloarenes. As well, they also reported a transition-metal-free systems for the cross coupling reactions of nitrogen heteroaromatics and alkanes (18-19)(Scheme-4). Itami et al. proposed a radical pathway for the sole KOBut promoted direct arylation of electron-deficient nitrogen heterocycles with aryl iodides.

Scheme-3
Scheme-4

Recently, the most notable examples are three ‘transition matal free’ methods for pereparing biaryls by C-H activation. 


Now, these reports getting a lot of attention, and a lot of raised eyebrows. The authors claim that they can couple aryl iodides with  unfunctionalized aromatic compounds with nitrogen bidentate ligands as catalysts - and no transition metals at all - just potassium or sodium t-butoxide as base. Organic chemists will recognize that this is a very unusual reaction indeed, since carbon-carbon bonds between aryl groups are not supposed to be so easy to form. This reaction, in fact, would suggest that a lot of the palladium-catalyzed work is some sort of odd detour to get to a process that happens fairly easily anyway.

The authors suggest that since they're using iodides that a free radical mechanism is operating. Addition of radical scavengers, they say, shuts the reaction down. The fact that they don't get regioisomers, that rules out another possible mechanism through benzyne intermediates.

It is also worth noting a paper from earlier this year reporting the use of an iron catalyst (20) (Scheme-5) — iron acetate combined with 10 mol% bathophenanthroline (4, 7-diphenyl-1, 10-phenanthroline) as a ligand — for the same sorts of couplings. In this case, the researchers actually tried the reaction of iodotoluene and benzene in the absence of the iron salt (but in the presence of the bathophenanthroline) and obtained no product. Could it be that the two ‘transition-metal-free’ methodologies are in fact catalysed by very low levels of iron? This in turn begs the question: What does it take to prove that a transformation is transitionmetal free?

Scheme-5

The authors Liu, W.; as well Sun, C.L.; mentioned that, In order to eliminate the possibility of the presence of trace transition metal elements in the commercially available potassium tert-butoxide that would potentially affect our investigation, they purified the KOBut by sublimation prior to their examination. Almost the same results were obtained between the nonpurified and purified base.

Could trace amounts of transition metal have contaminated the experiment? 'Obviously this is one of the most important factors,' says Lei. 'We have checked the contamination of trace amounts of transition metals by ICP [inductively coupled plasma atomic emission spectroscopy] and excluded the involvement of small amounts of transition metals in this transformation.'

Commenting on the work, Carsten Bolm, an organic synthesis expert from Aachen University in Germany, says, 'To be able to prepare cross-coupling products without the use of transition metals is an important scientific advance. Although at the present stage the substrate scope is by far too limited to make the process synthetically attractive, the findings illustrate that new reaction paths in direct C-H arylations are still to be discovered, and as such this work will be highly stimulating to the community.'

References:

1. McGlacken, G. P.; Bateman, L. M. Chem. Soc. Rev. 2009, 38, 2447–2464.
2. Daugulis, O.; Do, H. Q.; Shabashov, D. Acc. Chem. Res. 2009, 42, 1074–1086.
3. Fagnou, K. & Lautens, M. Chem. Rev. 2003,103, 169–196 .
3. Kuninobu, Y., Nishina, Y., Takeuchi, T. & Takai, K. Angew. Chem. Int. Ed. 2007 , 46, 6518–6520.
4. Lersch, M. & Tilset, M. Chem. Rev. 2005, 105, 2471–2526.
5. Li, Z., Brouwer, C. & He, C. Chem. Rev. 2008, 108, 3239–3265.
6. Chen, X., Hao, X.-S., Goodhue, C. E. & Yu, J.-Q. J. Am. Chem. Soc. 2006, 128, 6790–6791.
7. Gandeepan, P.; Parthasarathy, K.; Cheng, C.-H. J. Am. Chem. Soc. 2010, 132, 8569.
8.  Fujita, K.; Nonogawa, M.; Yamaguchi, R. Chem. Commun. 2004, 1926– 1927.
9.  Lafrance, M.; Fagnou, K. J. Am. Chem. Soc. 2006, 128, 16496– 164.
10. Kobayashi, O.; Uraguchi, D.; Yamakawa, T. Org. Lett. 2009, 11, 2679–2682.
11.  Vallee, F.; Mousseau, J. J.; Charette, A. B. J. Am. Chem. Soc. 2010, 132, 1514–1516.
12.  Liu, W.; Cao, H.; Lei, A. Angew. Chem., Int. Ed. 2010, 49, 2004–2008.
13. Leadbeater, N. E. & Marco, M. Angew. Chem. Int. Ed. 42, 1407–1409 (2003).
14. Leadbeater, N. E. & Marco, M. J. Org. Chem.2003 68, 5660–5667.
15. Leadbeater, N. E., Marco, M. &Tominack, B. J. Org. Lett. 2003, 5, 3919–3922.
16. Buchwald, S. L. & Bolm, C. Angew. Chem. Int. Ed. 2009,  48, 5586–5587.
17. Bajracharya, G. B.; Daugulis, O. Org. Lett. 2008, 10, 4625–4628.
18. Yanagisawa, S.; Ueda, K.; Taniguchi, T.; Itami, K. Org. Lett. 2008, 10, 4673–4676.
19. Deng, G. J.; Ueda, K.; Yanagisawa, S.; Itami, K.; Li, C. J. Chem. Eur. J. 2009, 15, 333–337.
20. Valle, F., Mousseau, J. J. & Charette, A. B. J. Am. Chem. Soc. 2010, 132, 1514–1516.


Adsende

Science: Current Issue

Angewandte Chemie

Advanced Synthesis & Catalysis

Chemistry - A European Journal

European Journal of Organic Chemistry

Chemical Reviews

Journal of the American Chemical Society

The Journal of Organic Chemistry

Organometallics

Organic Letters

RSC - Chem. Sci. latest articles

ACS Catalysis: Latest Articles (ACS Publications)

RSC - Chem. Sci. latest articles

RSC - Chem. Commun. latest articles

RSC - RSC Adv. latest articles

Science Magazine Podcast